From two to more than 25 layers, multilayer sintered mesh laminates provide enhanced mechanical properties for filters and extreme environmental applications. A layer of wire mesh is used for filtration, separation, sieving, lack of structural rigidity, and is liable to cause damage. The depth filter media can withstand high pressure drops by sequential addition to another layer or layers by a sintering process.
A five-layer sintered mesh was used as a strong alkali to make a six-layer sintered mesh, and a layer of 12 mesh was added. The six-layer sintered mesh laminate can be used as a three-in-one medical filter plate for filtration, washing and drying, and can be divided into two types: split type and single-piece structure filter plates.
Six-layer sintered mesh laminate
Filtration accuracy: 1 μm to 100 μm. Total thickness: 3.5 mm. Standard size: 1000 mm × 1200 mm.
Material: SUS 304, SUS 304 L, SUS 316, SUS 316 L, and other alloys may be provided as needed.
Features of multilayer sintered mesh laminates: High mechanical strength and good stability. High permeability. Stainless steel, corrosion resistant. Easy to make into other deep filter media. Precise filter rating. Easy to clean and can be reused many times.
Application of multilayer sintered mesh laminates:
Filtration: hot gas filter element, process filter element. Fluidization: fluidized bed, pneumatic slide, aerator, flow control device. Other applications: acoustic attenuation, foaming in air diffusers, flashing and explosion of fire retardant.
